Guides

How to build a protocol in Kinosis

What a protocol is

In Kinosis, a protocol is the list of everything a patient has to do, avoid, measure and know: before and after a surgery or a session, or during a treatment. The clinic builds it once in the portal and then assigns it to each patient with a date.

Everything hangs on one date, day 0: the day of the surgery or session, or the first day of the treatment. Each item says which days it runs, counted from day 0: negative days are before (for example, “no aspirin from day −7”), 0 is that day and positive days are after. When you assign the protocol to a patient and pick their date, Kinosis turns those days into real dates.

The same protocol works for every patient who follows it. What changes is the date and, if needed, an adjustment for that patient.

What each side sees:

In the portal, items are grouped into Before, Day 0 and After, according to their days.

Before you start: what to prepare

It helps to have all of this in writing before you open the portal. It’s usually in the instructions the clinic already gives patients on paper or as a PDF.

  1. Name of the protocol, as the patient knows it (for example, “Knee arthroscopy”).
  2. What to do and when: medication with doses and times, wound care, exercises, self-care. For each one, from which day to which day, counting from day 0.
  3. What to avoid: getting the wound wet, driving, intense exercise, alcohol, certain medications, smoking. Also from and to which day.
  4. Measurable goals, if any: litres of water a day, protein, steps, hours of sleep.
  5. What you want to know from the patient: photos of the wound and on which days, check questions (“Do you have a fever?”, pain from 0 to 10), readings (temperature, blood pressure, weight).
  6. When to alert the team: which answers or values raise an alert and which are urgent; for readings, also a change over a few days (for example, 2 kg more in 3 days) or several days without a reading; and who on the team to notify in each case.
  7. Messages and explanations: what the patient should read at a certain moment (“It’s normal for the knee to be swollen in the first few days”).
  8. Follow-up visits: on which days, and whether in person, by video or by phone.
  9. Symptoms to watch: the two or three the team wants to follow from 0 to 10 (for example, pain, swelling, stiffness).
  10. The clinic’s content: articles, videos or the leaflet you give patients, to attach to the protocol or to an item.

Shortcut: if the instructions already exist on paper, you can dictate them, take a photo or paste them into the portal (Write the protocol). Kinosis lists the items it reads, adds nothing that isn’t there and marks what’s missing. Then you review each item and save it as a clinic protocol.

Step by step in the portal

1. Create the protocol. In the menu, go to Protocols and tap New protocol.

2. Fill in the protocol details.

3. Add the items. One for each thing on your list. For each item:

4. Review and save. Tap Create protocol. If something is missing (an item with no category, an end day before the start day), the portal marks it under the item.

Editing later: you can change the protocol whenever you like with Save protocol. Changes apply to patients who get it from then on; those already following it keep their items.

Another way to create it: build the protocol directly on a patient and, from their Protocol tab, tap Save as clinic protocol. The items are saved with their doses and their days from day 0, without that patient’s dates or details.

Item types and when to use each

Type The patient sees it under What it’s for Examples
Instruction To do Something done at a moment: a dose, wound care, an exercise session. The patient answers Yes or No. Antibiotic every 12 h, days 0 to 6 · Ice for 20 minutes 3 times a day, days 0 to 7
Goal Goals A number to reach over a period. Measured from what the patient logs or from their phone or watch. 2 litres of water a day · 8,000 steps · 100 g of protein
Restriction Avoid Something not done during the whole period. Asked once a day, all together. No aspirin, days −7 to −1 · Keep the wound dry, days 0 to 14 · No smoking
Check Check-ins A piece of data that is itself the information: a photo, a question, a reading. Wound photo on days 2, 7 and 14 · “Do you have a fever?” · Pain from 0 to 10 · Temperature
Message Messages An explanation or a notice at the right moment. No answer needed. “It’s normal for the knee to be swollen in the first few days”
Visit Visits A follow-up appointment. Creates the real appointment, with its reminder and the pre-visit summary for the team. In-person check on day 7 · Video call on day 30

How to choose:

One thing, one item. If something is already an Instruction (for example, “30-minute walk, Monday, Wednesday and Friday”), don’t also add a Goal for the same thing: the patient would see two requests for one thing. Use an Instruction when the team decides what to do and when, and a Goal when reaching a number matters, however it’s done (for example, “150 minutes of activity a week”).

Useful options by type:

Rules on readings

On a number Check (weight, blood pressure, glucose, temperature) you can set several rules. Each one is an Alert or Urgent and says who to notify: the protocol’s clinician or someone on the team.

Readings from devices:

When a rule fires, it appears in the queue with the reading, where it came from and a chart of the last few days, and the chosen clinician gets an email with no health data, linking to the alert: urgent ones at once, the rest grouped hourly. The emails can be turned off in Settings → Organisation. Kinosis flags; the team makes the decisions.

Assigning it to a patient

If the patient is already on Kinosis: open their record, go to the Protocol tab and tap Assign a protocol.

  1. Pick the protocol.
  2. Enter the day 0 date (for example, the day of surgery) and, if it applies, the time. If there’s no particular date, choose No particular day 0: everything starts today.
  3. Tap Review items. You’ll see each item with its real dates. You can adjust a dose, remove an item that doesn’t apply to this patient or add another.
  4. If you like, fill in the start details, which only the team sees: area and side, parameters, products used, a starting photo and a note.
  5. Confirm. Nothing reaches the patient before you confirm.

If they’re not on Kinosis yet: use New patient. The portal creates a six-character code with their protocol. Give it to them however you prefer (in person, by message or by email). When they enter it in the app and accept, they get their plan.

What the patient gets:

After assigning it:

Following up

Example: knee arthroscopy

An illustrative protocol for a knee arthroscopy. Day 0 is the day of surgery. Products, doses and days are always set by the clinic’s team.

Details: name “Knee arthroscopy” · symptoms to watch: pain, swelling, stiffness · automatic follow-up on · surgery leaflet attached.

Item (what the patient sees) Type Days Schedule or detail
No aspirin or anti-inflammatories Restriction −7 to −1 Daily question
Fast from midnight Message −1 In the afternoon
Ice on the knee Instruction 0 to 7 20 minutes, 3 times a day
Paracetamol 1 g Instruction, as needed 0 to 7 Maximum 4 a day; alerts the team if exceeded
Quadriceps exercises Instruction 1 to 28 9:00, 14:00 and 19:00, with the clinic’s video
Keep the wound dry Restriction 0 to 14 Daily question
No driving Restriction 0 to 14 Daily question
Steps Goal 7 to 28 At least 4,000 a day, measured by the phone
“Do you have a fever above 38 °C, or is the wound oozing?” Check (Yes / No) 1 to 10 Urgent if the answer is Yes
“It’s normal for the knee to be swollen in the first few days” Message 2 In the morning
Wound photo Check (photo) 2, 7 and 14 Body area: knee
Check-up and stitches out Visit 10 In person
Check-up Visit 42 Video call

The exercises are an Instruction because the team decides which ones and when. Steps are a Goal because reaching the number is what matters, however it’s done.

Two treatment examples

In a treatment, day 0 is the day it starts (for example, the first dose). If there’s no particular date, when you assign it choose “No particular day 0: everything starts today”. As in the previous example, products, doses and days are set by the team.

Weekly semaglutide

Details: name “Weekly semaglutide” · symptoms to watch: nausea, constipation, heartburn · automatic follow-up on · marker: weight (kg, lower is better).

Item (what the patient sees) Type Days Schedule or detail
Semaglutide Instruction, with Dose by days From 0 Once a week, Monday 9:00 · 0.25 mg on days 0 to 27, 0.5 mg from day 28
Protein Goal From 0 At least 90 g a day
Weight Check (number) Every 7 days In the morning, fasting · uses the synced scale, if they have one · alert if there’s no reading for 14 days
“Did you have nausea or vomiting that stopped you eating?” Check (Yes / No) From 0 24 hours after each dose · alerts the team if the answer is Yes
“If you feel nauseous, eat smaller portions, slowly” Message 0 In the afternoon
Check-up before increasing the dose Visit 25 Video call
Check-up Visit 84 In person

The dose change goes inside the same item (Dose by days), not as a new item: the patient sees the dose due each week and the team sees the history of changes.

Hypertension: starting treatment

Details: name “Hypertension: starting treatment” · symptoms to watch: headache, dizziness · no particular day 0 · marker: systolic blood pressure (mmHg, lower is better).

Item (what the patient sees) Type Days Schedule or detail
Enalapril 10 mg Instruction From the start Once a day, 9:00
Blood pressure (the top number) Check (number) From the start 9:00 and 21:00 · uses readings from the synced monitor · urgent if 180 or more · alert if it rises more than 20 in 7 days · alert if there’s no reading for 3 days
“Do you have chest pain, shortness of breath or a very bad headache?” Check (Yes / No) From the start Once a day · urgent if the answer is Yes
No added salt Restriction From the start Daily question
Activity Goal From the start At least 150 minutes a week
Check-up Visit 30 In person

Activity is a Goal, not an Instruction: the patient reaches the minutes however they like, and their phone or watch counts them.

Checklist before using it

Start your 14-day trial